SETTING UP

When assembling your deck out of the box, follow the basic steps below. For more detailed deck setup information, download the PDF file titled “Tuning your bord” in the Learn 2 Ride section.

Mounting your trucks onto your deck

• Find eight pre-drilled truck mount holes on under-side of deck that match the hole pattern of your truck.
• Poke holes through black griptape using small allen key provided.
• Insert eight mounting bolts through holes on TOP side of deck.
• Mount trucks to bottom of deck with center wheels facing inwards.
• Tighten eight nuts firmly (bolt heads should be flush with top of deck).

Mounting Bindings

• Determine which pre-drilled binding holes best match your stance.
• Poke holes through black griptape using small allen key provided.
• Insert four mounting bolts through holes on BOTTOM side of deck.
• Mount bindings to top of deck and tighten nuts firmly (bolt heads should be flush with deck).
• If you are mounting Freebord’s S2 bindings, adjust angle of bindings to desired position before tightening nuts. Mount upper portions of bindings onto steel base and adjust using height adjust screws.